V-belt Movendis PP-AX76-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX76-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX76-EPDM-AS and any equivalents.
The Movendis PP-AX76-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 1967 mm, part of the PowerPlus EPDM Cogged Raw Edge Classical series. It is the belt to reach for when you are matching a drive that already runs an AX profile belt of this length.
Matching a replacement starts with the belt you are pulling off. Read the marking on the back of the old belt and note the profile and the length. If it reads AX and 1967 mm, this Movendis belt is the direct match. Check the drive for pulley wear, sheave alignment and any oil or heat exposure before the new belt goes on, since a worn sheave will shorten the life of any belt you install.
Where a drive runs more than one belt, replace the full set at the same time. Belts that have run together take a set and wear as a group, so mixing a new belt with used ones can leave the new belt carrying more than its share of the load. Confirm every position in the set is the same profile and length before ordering.
We carry the Movendis PowerPlus EPDM Cogged Raw Edge Classical line. To request a quote, send the part number PP-AX76-EPDM-AS by WhatsApp or email. If you are unsure whether this is the right belt, send a photo of the marking on the old belt along with the drive details and our team will confirm the match or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 1967mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt. If it shows an AX profile and a 1967 mm length, the PP-AX76-EPDM-AS is the match. If the marking is worn off, send us a photo and the drive details and we will confirm it.
- Should I replace all the belts on a multi-belt drive at once?
- Yes. Belts that have run together wear as a set, so installing one new belt alongside used ones can overload the new belt. Order the same profile and length for every position in the set.
- What do you need to quote this belt?
- Send the part number PP-AX76-EPDM-AS by WhatsApp or email. If you want us to verify the match first, include a photo of the old belt marking and the drive details.