V-belt Movendis PP-AX65,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX65,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX65,5-EPDM-AS and any equivalents.
The Movendis PP-AX65,5-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 1701 mm. Before you fit it, check the drive and sheaves so the new belt runs true from the start.
Inspect sheave grooves for wear, rust, and embedded debris. Worn or damaged grooves can shorten belt life and cause vibration even when the replacement belt is correct. Confirm the sheaves are aligned and the take-up has enough adjustment for the new belt. Verify the belt marking on the old part matches the AX profile and the 1701 mm length before ordering.
The raw-edge cogged construction is suited to drives with small sheave diameters where a standard wrapped belt may not flex as needed. The AX profile is a classical V-belt cross-section. This belt is part of the Movendis PowerPlus EPDM Cogged Raw Edge Classical series.
When you request a quote, send the part number PP-AX65,5-EPDM-AS and the quantity. Our team can confirm the belt or suggest an equivalent based on the profile and length you provide.
Dimensions
- Section
- AX
- Length
- 1701mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Check sheave grooves for wear, rust, and debris, confirm sheave alignment, and make sure the take-up has enough adjustment for the new belt. Correcting drive issues first helps the belt run properly.
- How do I identify the belt I need?
- Read the marking on the back of the old belt. This belt is marked with the AX profile and a length of 1701 mm. If the marking is worn, measure the outside length and compare it to the data.
- What information should I send with my quote request?
- Send the part number PP-AX65,5-EPDM-AS, the quantity, and any details about the drive. If you are unsure about the part number, include the profile and length from the old belt.