V-belt Movendis PP-AX64-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX64-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX64-EPDM-AS and any equivalents.
The Movendis PP-AX64-EPDM-AS is a cogged classical V-belt in the AX profile, 1663 mm long, from the PowerPlus EPDM Cogged Raw Edge Classical series. Cogged classical belts are used on drives that need a raw-edge profile, such as industrial machinery and auxiliary drives where a standard wrapped belt may not suit the pulley set. Confirm fit by matching the profile and length on the belt you are replacing.
To check this belt against your drive, read the marking on the back of the old belt. The profile should read AX and the length should match 1663 mm. If the old belt is worn or the marking is gone, measure the outside length and compare it with the 1663 mm figure for this belt.
The raw-edge cogged construction is common on drives where the belt bends over smaller pulleys. Inspect the pulleys for wear, alignment and debris before fitting a replacement. If the drive uses more than one belt, replace the full set so the belts share the load evenly.
We carry the Movendis PP-AX64-EPDM-AS and can help confirm it is the right belt for your equipment. Send the part number, the belt marking and a photo of the drive by WhatsApp or email and our team will reply promptly with a quote.
Dimensions
- Section
- AX
- Length
- 1663mm
Frequently asked questions
- How do I confirm the Movendis PP-AX64-EPDM-AS fits my drive?
- Check the marking on the back of the belt you are replacing. It should show the AX profile and a length of 1663 mm. If the marking is unreadable, measure the belt and compare it with the profile and length listed for this part.
- What information should I send for a quote?
- Send the part number PP-AX64-EPDM-AS, the marking on your old belt, and the machine or drive details. A photo of the belt and pulleys helps us confirm the profile and length before quoting.
- Can you help if my current belt has a different part number?
- Yes. Send the part number and marking from your current belt. We will compare the profile and length with the Movendis PP-AX64-EPDM-AS and confirm whether it matches or suggest an equivalent.