V-belt Movendis PP-AX52-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX52-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX52-EPDM-AS and any equivalents.
The Movendis PP-AX52-EPDM-AS is a cogged classical V-belt with an AX profile and a length of 1358 mm. It is built for drives that use a raw-edge cogged belt in this profile and length. To select the correct replacement, match the marking on the old belt to this part number.
Start by reading the back of the belt being replaced. Confirm the profile is AX and the length is 1358 mm. The part number PP-AX52-EPDM-AS should appear on the belt or in the equipment manual. If the marking is worn, measure the outside length and compare it to the 1358 mm specification.
Check the drive for any signs of wear that could affect belt life, such as misalignment, worn sheaves or damaged pulleys. A cogged raw-edge classical belt like this one is used where the drive requires the AX profile. If multiple belts run together, replace them as a set to keep tension even across the drive.
When you request a quote, send the part number PP-AX52-EPDM-AS, the profile AX and the length 1358 mm. If you are unsure, send a photo of the old belt and the drive nameplate. Our team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 1358mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt. It should show the profile AX and a length of 1358 mm. The part number PP-AX52-EPDM-AS may also be printed. If the old belt is unreadable, measure the outside length and compare it to 1358 mm.
- What information do I need to send for a quote?
- Send the part number PP-AX52-EPDM-AS, the profile AX and the length 1358 mm. If you have the old belt, a photo of its marking helps. We will confirm the belt or suggest an equivalent.
- Should I replace all belts on the drive at the same time?
- Yes, when multiple belts run together, replacing them as a set helps maintain even tension and alignment. Mixing new and worn belts can cause uneven load and shorter belt life.