V-belt Movendis PP-AX40,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX40,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX40,5-EPDM-AS and any equivalents.
The Movendis PP-AX40,5-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 1066 mm. When you need to match an existing drive, the marking on the back of the old belt is the best starting point. This belt is part of the PowerPlus EPDM Cogged Raw Edge Classical series.
The marking on the back of a worn belt gives you the profile and the length in one line. Read it before the belt is removed, because the printing can wear off. The PP-AX40,5-EPDM-AS corresponds to an AX profile and a 1066 mm length. If the old marking is unreadable, measure the outside length and note the cross-section.
A cogged classical V-belt like this one is used on drives where a standard wrapped belt may not fit or may run hotter. The raw edge and cog design help with flexibility and heat dissipation. This belt is not a narrow wedge belt, a banded belt, or a synchronous belt, so confirm the pulley groove matches the AX profile.
To request a quote, send the part number PP-AX40,5-EPDM-AS, the quantity, and a photo of the old belt marking if possible. We carry Movendis belts and can help confirm the correct belt or suggest an equivalent when the original marking is unclear.
Dimensions
- Section
- AX
- Length
- 1066mm
Frequently asked questions
- How do I read the marking on my old belt?
- Look for the profile letters and the length number printed on the back. The PP-AX40,5-EPDM-AS shows AX as the profile and 1066 mm as the length. If the marking is worn, measure the outside length and the top width.
- Can I use this belt if my old belt is a different brand?
- Yes, as long as the profile and length match. This is an AX profile belt with a 1066 mm length. Send us the old marking or a photo and we can help confirm it.
- What should I send to get a quote?
- Send the part number PP-AX40,5-EPDM-AS, the quantity you need, and any details from the old belt marking. If you have a photo of the belt or the drive, that also helps us confirm the right part.