V-belt Movendis PP-AX32-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX32-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX32-EPDM-AS and any equivalents.
The Movendis PP-AX32-EPDM-AS is a cogged classical V-belt in the AX profile with an 850 mm length. Use these two dimensions to match the belt you are replacing before you request a quote.
The AX profile identifies a classical V-belt cross-section, and the cogged raw edge construction is what the PowerPlus EPDM Cogged Raw Edge Classical series name describes. The 850 mm length is the datum you compare against the old belt. Confirm both the profile and the length from the belt you are removing, not from the machine manual alone, since drives are sometimes modified.
If the marking on the back of the belt is worn or unreadable, measure the length and check the cross-section against the AX profile. Send the part number PP-AX32-EPDM-AS, or your measured profile and length, by WhatsApp or email and we will confirm the belt or suggest an equivalent.
When a drive runs more than one belt, replace the full set at the same time so the belts share the load evenly. Inspect the sheaves for wear or debris while the belts are off, and check that the new belt sits correctly in the groove before tensioning.
Dimensions
- Section
- AX
- Length
- 850mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The AX profile gives the cross-section of this classical V-belt, and 850 mm is its length. Both must match the belt on your drive.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt. If it is unreadable, measure the length and check the cross-section against the AX profile, then send those details for confirmation.
- What should I send to request a quote?
- Send the part number PP-AX32-EPDM-AS, or your measured profile and length, by WhatsApp or email. We reply promptly and can help confirm the right belt or suggest an equivalent.