V-belt Movendis PP-AX27,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX27,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX27,5-EPDM-AS and any equivalents.
The Movendis PP-AX27,5-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 736 mm. It is part of the PowerPlus EPDM Cogged Raw Edge Classical series. When replacing a belt, start by confirming the profile and length against the belt you are removing.
To match this belt to the one being replaced, read the marking on the back of the old belt. Look for the profile, in this case AX, and the length, 736 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the 736 mm listed for this belt. The AX profile is a classical V-belt cross-section, and the cogged raw edge construction is typical of this series.
The part number PP-AX27,5-EPDM-AS combines the profile and length, so you can use it to confirm the match. Check that the belt sits correctly in the pulley groove and that the sheave is not worn or damaged. If the drive uses multiple belts, replace them as a set to keep load sharing even.
For a quote, send the part number PP-AX27,5-EPDM-AS and the quantity you need. If you are unsure about the profile or length, include a photo of the belt marking or the drive nameplate. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 736mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt for the profile and length. This belt has an AX profile and a length of 736 mm. If the marking is not clear, measure the outside length and compare it to 736 mm.
- Can I use this belt on a drive that takes multiple belts?
- Yes, but if the drive uses more than one belt, replace all belts at the same time. Mixing new and worn belts can cause uneven load sharing.
- What information do I need to request a quote?
- Send the part number PP-AX27,5-EPDM-AS and the quantity. If you are unsure about the profile or length, include a photo of the belt marking or the drive nameplate.