V-belt Movendis PP-AX25-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX25-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX25-EPDM-AS and any equivalents.
The Movendis PP-AX25-EPDM-AS is a cogged classical V-belt with an AX profile and a 672 mm length. It is built for drives that use a raw edge cogged construction. To match the belt being replaced, confirm the profile and length on the old belt.
Start by reading the marking on the back of the belt you are replacing. You are looking for the profile and the length. This belt is AX profile and 672 mm. If the old belt shows AX and 672 mm, the PP-AX25-EPDM-AS is the correct size to request. If the marking is worn or missing, measure the length and compare it to 672 mm, and check that the cross-section matches the AX profile.
Cogged classical V-belts are used on drives where a raw edge cogged belt is specified. The cogged construction can help with flexibility on smaller pulleys, but the key is the profile and length. Do not substitute a different profile or length without checking the drive. A belt that is too long or too short will not tension correctly and can damage the drive.
When you request a quote, send the part number PP-AX25-EPDM-AS and the quantity you need. If you are replacing multiple belts on the same drive, it is good practice to replace them as a set so they wear evenly. Our team can confirm the belt or suggest an equivalent if needed. Contact us by WhatsApp or email with the part number.
Dimensions
- Section
- AX
- Length
- 672mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt. It should show the profile and length. This belt is AX profile and 672 mm. If those match, it is the same size.
- What if the marking on my old belt is unreadable?
- Measure the length and compare it to 672 mm, and check that the cross-section matches the AX profile. If you are unsure, send us photos or dimensions and we can help confirm.
- Can I use this belt on any drive that takes an AX profile?
- Use it on drives that specify an AX profile and a 672 mm length. Do not substitute a different profile or length without checking the drive requirements.