V-belt Movendis PP-AX21-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX21-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX21-EPDM-AS and any equivalents.
The Movendis PP-AX21-EPDM-AS is a cogged classical V-belt in the AX profile with a 570 mm length. It is built for drives that use a classical cross-section and need the flexibility of a raw-edge cogged construction. To match it, compare the full marking on the belt you are replacing.
Start by reading the back of the old belt. The marking should show the profile and the length; here those are AX and 570 mm. If the old belt reads AX and 570 mm, this Movendis belt matches those two selection points. If either value differs, the belt will not sit correctly in the pulley grooves or maintain the correct center distance.
Check the belt construction as well. This is a cogged classical V-belt with a raw edge, so the underside has molded cogs. A replacement should have the same profile and length, and the same cogged raw-edge form if that is what the drive was set up for. Bring the old belt or a clear photo of its marking when you request a quote.
Send the part number PP-AX21-EPDM-AS, or the profile and length from the old belt, by WhatsApp or email. Our team can confirm the right belt or suggest an equivalent. For drives with more than one belt, note how many are on the drive so the set can be matched.
Dimensions
- Section
- AX
- Length
- 570mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt. This belt is AX profile and 570 mm long. If the old marking shows the same profile and length, it matches those selection points. If you are unsure, send a photo of the marking with your quote request.
- What should I send to request a quote?
- Send the part number PP-AX21-EPDM-AS, or the profile and length from the belt you are replacing, by WhatsApp or email. If the drive uses multiple belts, include the number of belts so the set can be matched.
- Can you help if I cannot read the old belt marking?
- Yes. Send a photo of the old belt, including any visible markings, and details of the drive. Our team can help confirm the right belt or suggest an equivalent.