V-belt Movendis PP-AX133-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX133-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX133-EPDM-AS and any equivalents.
The Movendis PP-AX133-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 3415 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Classical series. Use the part number and the marking on the belt you are replacing to confirm the match.
When matching this belt to the one being replaced, start with the marking on the back of the old belt. The part number PP-AX133-EPDM-AS identifies the brand, series, profile and length; the AX profile and 3415 mm length are the two dimensions to check first. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the 3415 mm figure.
The cogged raw edge construction is part of the PowerPlus EPDM Cogged Raw Edge Classical series. Confirm that the replacement belt follows the same routing and that the pulleys are clean and free of damage. If the drive uses more than one belt, replace the full set so the load is shared evenly.
Dimensions
- Section
- AX
- Length
- 3415mm
Frequently asked questions
- How do I confirm that this belt matches the one I am replacing?
- Check the marking on the back of the old belt for the part number PP-AX133-EPDM-AS. If it is unreadable, confirm the AX profile and the 3415 mm length against the belt you are removing.
- What information should I send to request a quote?
- Send the part number PP-AX133-EPDM-AS, the quantity you need, and the drive or equipment it fits. If you are unsure of the profile or length, include a photo of the marking on the old belt.
- Can this belt be used on a drive that currently runs a different brand?
- Yes, if the profile and length match. Compare the AX profile and 3415 mm length to the belt being replaced and confirm that the routing and pulley groove match before installation.