V-belt Movendis PP-AX118,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX118,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX118,5-EPDM-AS and any equivalents.
The Movendis PP-AX118,5-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 3047 mm. It is part of the PowerPlus EPDM Cogged Raw Edge Classical series. To request a quote, send the part number and any drive details you have.
When requesting a quote for this belt, include the part number PP-AX118,5-EPDM-AS and the quantity you need. If you are replacing an existing belt, the marking on the back of the old belt is the most reliable reference; a photo of that marking helps confirm the correct item. You can also send the machine or drive model and the sheave or pulley part numbers if they are known.
The AX profile and 3047 mm length identify this belt. If the old belt is worn or the marking is unreadable, measure the outside length and the top width, or send the drive's belt specification from the manual. Our team can then confirm that this Movendis belt matches your application or suggest an equivalent.
For drives that use multiple belts, it is good practice to replace all belts in the set at the same time. Inspect sheaves for wear, alignment, and debris during the change. If you are unsure whether this is the right belt, send the details you have and we will help you confirm the correct part.
Dimensions
- Section
- AX
- Length
- 3047mm
Frequently asked questions
- What information should I include when requesting a quote for this belt?
- Send the part number PP-AX118,5-EPDM-AS, the quantity required, and any drive details such as the machine model or sheave part numbers. A photo of the marking on the old belt is also helpful.
- How can I confirm this is the correct belt for my drive?
- Check the old belt's marking for the profile and length. This belt has an AX profile and a length of 3047 mm. If the marking is not clear, measure the outside length and top width, or provide the drive's belt specification.
- Should I replace all belts on a multi-belt drive at the same time?
- Yes, replacing all belts in a set helps maintain even tension and load sharing. Also inspect sheaves for wear, alignment, and debris during the change.