V-belt Movendis PP-AX115,5-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX115,5-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX115,5-EPDM-AS and any equivalents.
The Movendis PP-AX115,5-EPDM-AS is a cogged classical V-belt in the AX profile with a length of 2971 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Classical series. This page is for maintenance and purchasing staff who need to match the belt to the one being replaced.
The most reliable way to identify the correct belt is to read the marking on the back of the belt you are removing. Compare the profile and the length to the PP-AX115,5-EPDM-AS: AX profile, 2971 mm. If the marking is worn or missing, measure the belt and note the profile and length before ordering.
The PP-AX115,5-EPDM-AS is a cogged classical V-belt. The cogged raw edge construction is part of the PowerPlus EPDM Cogged Raw Edge Classical series. Use the profile and length as the primary selection criteria. If the drive uses multiple belts, replace them as a set so the load is shared evenly.
Inspect the drive while the belt is off. Check the sheaves for wear, alignment and cleanliness. Confirm that the replacement belt matches the original profile and length. For a quote, send the part number PP-AX115,5-EPDM-AS or the profile and length via WhatsApp or email. The team can confirm the belt or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 2971mm
Frequently asked questions
- How do I match the PP-AX115,5-EPDM-AS to the belt being replaced?
- Read the marking on the back of the old belt. The replacement must match the AX profile and the 2971 mm length. If the marking is not legible, measure the belt and note the profile and length.
- What should I send to request a quote for this belt?
- Send the part number PP-AX115,5-EPDM-AS, or the profile and length, by WhatsApp or email. The team will confirm the belt or suggest an equivalent.
- Should I replace all belts on the drive at the same time?
- If the drive uses multiple belts, replace them as a set. This helps maintain even load sharing and reduces the risk of premature failure.