V-belt Movendis PP-AX111-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- PowerPlus EPDM Cogged Raw Edge Classical
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-AX111-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-AX111-EPDM-AS and any equivalents.
The Movendis PP-AX111-EPDM-AS is a cogged classical V-belt in the AX profile, 2856 mm long. It is built for industrial drives that need a raw-edge, cogged belt to run over small pulleys. Confirm fit by checking the AX profile and 2856 mm length against your drive.
Cogged classical V-belts like this one are common on fans, pumps, compressors, and other industrial equipment where space is tight and pulley diameters are small. The AX profile and 2856 mm length are the two dimensions to match. If your drive uses an AX section and the belt path measures 2856 mm, this belt is the correct size.
To confirm fit, read the marking on the back of the old belt. It should show the profile and length. If the old belt is worn or the marking is gone, measure the outside length or the pitch length as your drive requires, then compare to 2856 mm. The profile AX is a classical V-belt cross-section, and the cogged raw edge helps the belt flex on small pulleys.
For a quote, send the part number PP-AX111-EPDM-AS, the profile AX, and the length 2856 mm. If you are replacing a belt on a drive that uses more than one belt, it is good practice to replace the full set so all belts wear evenly. Our team can help confirm the right belt or suggest an equivalent based on the data you provide.
Dimensions
- Section
- AX
- Length
- 2856mm
Frequently asked questions
- What does the AX profile mean on this belt?
- AX is a classical V-belt cross-section. It is a common profile for industrial drives. The belt is cogged, which means it has a raw edge and notches to help it bend over small pulleys.
- How do I confirm the 2856 mm length is correct for my drive?
- Check the marking on the back of your old belt. If it shows AX and 2856 mm, this belt matches. If the marking is not readable, measure the belt path as specified for your drive and compare to 2856 mm.
- Can you help me find an equivalent if this exact belt is not what I need?
- Yes. Send us the part number PP-AX111-EPDM-AS or the profile and length from your old belt. We will help confirm the right belt or suggest an equivalent.