Timing belt Movendis PP-976-8M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-976-8M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-976-8M-480 and any equivalents.
The Movendis PP-976-8M-480 is a PowerPlus Curvilinear timing belt with an HTD 8M profile, a 976 mm length and an 8 mm pitch. It is the correct replacement when the belt you are removing carries the same part number or the same profile and length.
To match it to the belt being replaced, read the marking on the back of the old belt. Confirm the part number PP-976-8M-480, or at minimum the HTD 8M profile and 976 mm length. If the old belt is worn or the marking is unreadable, measure the length and identify the profile before ordering.
This timing belt is used in synchronous drives where the belt teeth mesh with pulley grooves. The HTD 8M profile and 8 mm pitch define the tooth form and spacing, while the 976 mm length sets the belt's path around the pulleys. All three must match the drive.
When you request a quote, send the part number PP-976-8M-480 or the profile and length. If you are unsure, our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 976mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the belt you are replacing. It should show PP-976-8M-480, or at least the HTD 8M profile and 976 mm length. If the marking is gone, measure the old belt and note the tooth profile.
- What does the part number tell me about the belt?
- The code identifies this as a Movendis PowerPlus Curvilinear timing belt. The profile is HTD 8M, the length is 976 mm and the pitch is 8 mm. These are the key dimensions to match.
- Can you help if I cannot read the old belt marking?
- Yes. Send us the profile and length you measure, or a photo of the old belt and the pulley. We will help confirm the correct belt or suggest an equivalent.