Timing belt Movendis PP-975-D/5M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-975-D/5M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-975-D/5M-180 and any equivalents.
The Movendis PP-975-D/5M-180 is a double-sided timing belt from the PowerPlus Double-Sided Timing Belts series. It measures 975 mm in length. This page helps you match it to the belt you are replacing.
Start with the marking on the back of the belt you are removing. Confirm that the part number reads PP-975-D/5M-180 and that the length is 975 mm. The 'D' in the code indicates a double-sided construction, so the belt has teeth on both faces. If your old belt shows a different code or length, this is not the correct replacement.
Because this is a double-sided timing belt, both sides engage pulleys. Check that the failed belt has teeth on both faces and that the length matches 975 mm. Do not substitute a single-sided belt, as it will not drive the accessory or shaft on the back side.
Once you have confirmed the part number and length, send it to us by WhatsApp or email for a quote. If you are unsure, send a photo of the back of the belt and the drive arrangement. We can help confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 975mm
Frequently asked questions
- How do I identify the belt I need to replace?
- Read the part number printed on the back of the belt. For this belt, it should be PP-975-D/5M-180. Also verify the length is 975 mm. The 'D' indicates a double-sided timing belt.
- What does double-sided mean for this belt?
- A double-sided timing belt has teeth on both the top and bottom faces. This allows it to drive pulleys on both sides. Make sure your drive requires a belt with teeth on both sides.
- What information should I send for a quote?
- Send the part number PP-975-D/5M-180 and the length 975 mm. If you have the old belt, a photo of the marking and the drive setup helps us confirm the correct replacement.