Timing belt Movendis PP-968-D/8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-968-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-968-D/8M-180 and any equivalents.
The Movendis PP-968-D/8M-180 is a double-sided timing belt from the PowerPlus Double-Sided Timing Belts series, with a 968 mm length. Before you fit it, inspect the drive and sheaves so the new belt is not damaged by worn components.
Check both sides of the drive. Look for worn or hooked teeth on the pulleys, oil or grease on the sheaves, and any debris in the tooth grooves. Confirm the pulleys turn freely and that the shafts and bearings have no play. Misalignment between pulleys will shorten belt life, so check that the pulleys line up and that the belt runs straight.
Inspect the old belt for uneven wear, missing teeth or cracks. If the drive uses more than one belt, replace them as a set. Clean the pulleys and remove any rust or burrs from the grooves. Do not pry the belt over the flange; loosen the tensioner or idler and slide the belt into place.
The PP-968-D/8M-180 is a double-sided timing belt with a length of 968 mm. It is identified by the part number on the back of the belt. Send that number by WhatsApp or email to request a quote, and the team can confirm the belt or suggest an equivalent.
Dimensions
- Length
- 968mm
Frequently asked questions
- What should I check on the drive before installing the Movendis PP-968-D/8M-180?
- Inspect the pulleys for worn teeth, oil or grease, and debris in the grooves. Check that the pulleys turn freely, that there is no shaft or bearing play, and that the pulleys are aligned. Correct any misalignment before fitting the belt.
- How do I identify this belt on the machine?
- Look for the part number on the back of the belt. The Movendis PP-968-D/8M-180 is a double-sided timing belt with a 968 mm length.
- How do I request a quote for this belt?
- Send the part number PP-968-D/8M-180 by WhatsApp or email. The team replies promptly and can confirm the right belt or suggest an equivalent.