V-belt Movendis PP-8V2800
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 8V
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-8V2800 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-8V2800 and any equivalents.
The Movendis PP-8V2800 is a narrow wedge V-belt from the PowerPlus series, built for drives that need a compact, high-capacity belt. It uses the 8V profile and measures 7112 mm in length. This page covers where this type of belt is used and how to confirm it fits your drive.
Narrow wedge V-belts like this one are common on industrial drives where space is tight and loads are high, such as larger fans, pumps, compressors and process equipment. The 8V profile is a standard narrow wedge cross-section, so the belt seats in an 8V sheave groove. If your drive uses 8V pulleys and the current belt is marked 8V, this is the profile to match.
To confirm fit, read the marking on the back of the old belt. You need the profile (8V) and the length (7112 mm). Check the sheave grooves for wear, cracks or debris, and make sure the belt sits at the correct height in the groove. If the drive runs multiple belts, replace the full set at the same time so the load stays evenly shared.
Send the part number PP-8V2800, or the marking from your old belt, by WhatsApp or email to request a quote. If the number on your belt is different, send that instead and our team will help confirm the right 8V belt for your drive.
Dimensions
- Section
- 8V
- Length
- 7112mm
Frequently asked questions
- How do I know if the PP-8V2800 fits my drive?
- Check the marking on your old belt. You need an 8V profile and a 7112 mm length. Also confirm your sheaves are 8V and in good condition.
- Can I replace just one belt on a multi-belt drive?
- For drives with several belts, replace the full set at once so all belts share the load evenly. Mixing new and used belts can cause uneven tension.
- What should I send to get a quote?
- Send the part number PP-8V2800, or the complete marking from your old belt, by WhatsApp or email. If you are unsure of the profile or length, include a photo of the belt marking.