Timing belt Movendis PP-800-D/8M-180

MOVENDIS PP-800-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-800-D/8M-180 and any equivalents.

The Movendis PP-800-D/8M-180 is a double-sided timing belt from the PowerPlus Double-Sided Timing Belts series, with a length of 800 mm. Before you fit it, take a few minutes to inspect the drive and its sheaves. A worn or misaligned drive will shorten the life of any new belt.

Start with the sheaves. Check the grooves for wear, corrosion, nicks or embedded debris, and confirm the teeth are not hooked or rounded. Look for oil or grease on the sheave faces and around the shaft seals, since contamination will attack the belt compound. Any sheave that has run with a damaged belt should be examined closely before the new belt goes on.

Check alignment and tension. Misalignment between sheaves will pull the belt to one side and wear the edges, so verify the shafts are parallel and the sheaves sit in the same plane. Confirm the tensioner and any idler turn freely and are not binding. On a double-sided belt, both faces drive, so both sides of the drive path matter. Set tension to the drive manufacturer's specification for this belt.

Once the drive checks out, fit the PP-800-D/8M-180 and recheck tension after the first run-in period. If you are unsure which belt your drive takes, send the part number, the belt marking and the drive details by WhatsApp or email and our team will confirm the right belt or suggest an equivalent.