Timing belt Movendis PP-695-D/5M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-695-D/5M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-695-D/5M-180 and any equivalents.
The Movendis PP-695-D/5M-180 is a double-sided timing belt from the PowerPlus Double-Sided Timing Belts series with a length of 695 mm. It has teeth on both sides, so it can drive pulleys from either face in reversing or multi-axis layouts. This page gives you the profile and length to match against your drive.
Two numbers matter when you select this belt: the 5M profile and the 695 mm length. The 5M profile fixes the tooth pitch and pulley groove form, so it must match the pulleys already on the drive. The 695 mm length is the datum you read off the old belt or measure around the pulley path.
A double-sided timing belt is specified where a single-sided belt cannot transmit motion to two opposing pulleys or where the drive reverses direction. Because both faces carry teeth, the back side can run against a toothed pulley rather than a flat idler. Confirm the profile and length before ordering.
When you request a quote, send the part number PP-695-D/5M-180 and, if you have it, the marking on the back of the old belt. A photo of the drive and the pulley tooth count help us confirm the 5M profile and 695 mm length. If the exact belt is not what you need, we can suggest an equivalent.
Dimensions
- Length
- 695mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The 5M profile sets the tooth pitch and pulley groove form, and the 695 mm length sets the belt's path around the drive. Both must match your existing pulleys and layout for the belt to run correctly.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare it to PP-695-D/5M-180. Check that the profile is 5M and the length is 695 mm. If the marking is worn, send a photo of the drive and the pulley tooth count.
- Can you help if this exact belt is not what I need?
- Yes. Send the part number, the old belt marking, and your pulley details by WhatsApp or email. We carry Movendis belts and can confirm the right belt or suggest an equivalent.