Timing belt Movendis PP-680-8M-370
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-680-8M-370 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-680-8M-370 and any equivalents.
When you need to replace a timing belt, start by reading the marking on the back of the old belt. The Movendis PP-680-8M-370 is a timing belt with an HTD 8M profile, a 680 mm length and an 8 mm pitch. Match those three details to your drive and use the part number to request a quote.
The marking on a timing belt typically shows the profile and the length. For this belt, the profile is HTD 8M and the length is 680 mm. The pitch is 8 mm. Confirm these values against the old belt before you order. If the old belt is worn or the marking is unreadable, measure the length and identify the profile from the pulley grooves.
This is a Movendis PowerPlus Curvilinear timing belt. It is a synchronous belt, so it relies on tooth engagement rather than friction. That makes correct profile and length critical. An HTD 8M profile will not interchange with other profiles, even if the length appears similar.
To request a quote, send the part number PP-680-8M-370 by WhatsApp or email. If you are replacing a belt on a drive that runs multiple belts, include the quantity you need. Our team can help confirm the right belt or suggest an equivalent based on the marking and the application details you provide.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 680mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the old belt. You need to match the profile (HTD 8M), the length (680 mm) and the pitch (8 mm). If the marking is worn, measure the old belt and check the pulley grooves to identify the profile.
- What information should I send with my quote request?
- Send the part number PP-680-8M-370 and the quantity you need. If you are replacing a belt on a multi-belt drive, let us know so we can help you plan the replacement.
- Can I use a different profile if the length is the same?
- No. Timing belts require the correct profile to mesh with the pulley teeth. The HTD 8M profile is specific to this belt, and the 680 mm length and 8 mm pitch must also match your drive.