Timing belt Movendis PP-660-D/S5M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-660-D/S5M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-660-D/S5M-180 and any equivalents.
This Movendis PowerPlus double-sided timing belt, part number PP-660-D/S5M-180, measures 660 mm in length. Double-sided timing belts are used where a drive needs to transmit motion from both faces of the belt, such as reversing or dual-output industrial drives. To confirm fit, check the existing belt marking and the drive's pulley configuration.
This belt is a double-sided timing belt, meaning it has teeth on both sides. It is commonly found on industrial equipment where two driven pulleys rotate in opposite directions from a single belt run, or where space limits the use of two separate belts. The 660 mm length is the datum to match when comparing against the belt currently on the drive.
To confirm this belt suits your application, inspect the old belt for the part number on the back. Verify that both pulley faces are toothed and that the belt path matches a double-sided configuration. If the marking is worn, measure the belt length and count the teeth on both sides, then send those details with your quote request.
We carry the Movendis PowerPlus line and can help you confirm the right belt or suggest an equivalent. Send the part number PP-660-D/S5M-180, along with any photos of the old belt and the drive setup, by WhatsApp or email. Our team replies promptly with the information you need to proceed.
Dimensions
- Length
- 660mm
Frequently asked questions
- How do I confirm that the PP-660-D/S5M-180 is the correct belt for my drive?
- Check the part number printed on the back of the belt currently installed. If it matches, and the drive uses toothed pulleys on both sides of the belt, this is the correct replacement. If the marking is illegible, measure the belt length and note the tooth profile on both faces before requesting a quote.
- What should I send with my quote request for this belt?
- Send the part number PP-660-D/S5M-180, the quantity required, and any photos of the old belt and the drive. If you have the original equipment documentation, include the belt designation shown there. This helps us confirm the correct item or suggest an equivalent.
- Can you help if I need a different length or profile?
- Yes. If the 660 mm length or the double-sided configuration does not match your drive, send the details of the belt you need. We can check our range and suggest an equivalent that fits your application.