V-belt Movendis PP-5VX955-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX955-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX955-EPDM-AS and any equivalents.
The Movendis PP-5VX955-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a length of 2426 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. Before fitting this belt, inspect the drive and sheaves so the new belt runs true from the start.
Check sheave grooves for wear, rust, and embedded debris. Worn or misaligned sheaves can damage a new cogged narrow V-belt quickly, regardless of the belt's condition out of the box. Confirm that the sheave profile matches the 5VX belt cross-section and that all grooves are clean and free of sharp edges.
Verify alignment between the driving and driven sheaves with a straightedge or laser alignment tool. Misalignment causes uneven sidewall loading, heat buildup, and premature belt failure. Also check that the take-up adjustment has enough travel to install the 2426 mm belt and apply correct tension without bottoming out.
Inspect the rest of the drive for worn bearings, bent shafts, or loose mounting bolts. Correct any issues before installing the Movendis PP-5VX955-EPDM-AS. If you need to confirm this is the right belt for your drive, send the part number and your machine details to MR by WhatsApp or email for a prompt quote.
When replacing a belt on a multi-belt drive, fit the full set at the same time. Mixed belts can run at different tensions and cause the new belt to carry more than its share of the load. The same 5VX profile and 2426 mm length help match the original drive specification.
Dimensions
- Section
- 5VX
- Length
- 2426mm
Frequently asked questions
- What does the marking on the back of the belt tell me?
- The back of the belt typically shows the brand, part number, profile, and length. On this belt you should see Movendis, PP-5VX955-EPDM-AS, 5VX profile, and 2426 mm length. Use those markings to confirm you are replacing with the same size.
- Can MR help me confirm this belt fits my drive?
- Yes. Send the part number, the old belt's markings, and a few details about the drive and sheaves by WhatsApp or email. The team will check the profile and length and can suggest an equivalent if needed.
- What should I check on the sheaves before installing this belt?
- Inspect the sheave grooves for wear, rust, or debris, and confirm the grooves match the 5VX profile. Check alignment between sheaves and make sure the take-up adjustment has enough travel for the 2426 mm belt.