V-belt Movendis PP-5VX785-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX785-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX785-EPDM-AS and any equivalents.
The Movendis PP-5VX785-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a length of 1994 mm. Before fitting it, inspect the drive and sheaves, since worn grooves or misalignment will shorten the life of any new belt. We carry this belt and quote it by part number.
Check sheave grooves for wear, rust, or embedded debris, and confirm the sheaves are aligned and secure on their shafts. A groove that has worn wider lets the belt sit too deep, so it slips and runs hot even when the belt itself is correct. Look at the old belt as well: a clean break, a burned back, or uneven side wear each point to a different condition on the drive.
This belt is a cogged narrow V-belt in the 5VX profile, 1994 mm long. Cogged construction is common on compact drives where the belt must bend around smaller sheaves. When a drive uses more than one belt, fit the full set at the same time so the load stays shared evenly.
Send the part number PP-5VX785-EPDM-AS by WhatsApp or email with the quantity you need, and our team will confirm the belt and reply with a quote. If you are unsure of the profile or length, send a photo of the marking on the back of the old belt and the sheave dimensions.
Dimensions
- Section
- 5VX
- Length
- 1994mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheave grooves for wear, rust, or debris, and verify alignment and shaft security. Correct any groove or alignment problem first, because a new belt will wear quickly on a drive that is out of condition.
- How do I confirm this is the right belt for my drive?
- Compare the profile and length against the marking on the old belt. This belt is 5VX profile and 1994 mm long. If the marking is unreadable, send us the sheave dimensions and we will help you confirm the match.
- How do I request a quote?
- Send the part number PP-5VX785-EPDM-AS by WhatsApp or email, along with the quantity you need. Our team replies promptly and can help confirm the belt or suggest an equivalent.