V-belt Movendis PP-5VX765-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX765-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX765-EPDM-AS and any equivalents.
The Movendis PP-5VX765-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a 1943 mm length, part of the PowerPlus EPDM Cogged Raw Edge Narrow series. When replacing a belt, confirm the profile and length match the belt currently on the drive. This page gives you the exact identification details to compare against the belt you are removing.
Start by reading the marking on the back of the old belt. Look for a 5VX profile and a 1943 mm length. The Movendis PP-5VX765-EPDM-AS matches those two values. A cogged narrow V-belt of this size is used where a standard wrapped belt may not fit or run as cool. The raw edge and cogged construction are part of the series name.
If the old belt is worn, oil-soaked, or has missing cogs, replace it before it fails. Check the sheave grooves for wear and alignment. A belt that is too loose or too tight can damage bearings or reduce power transmission. Use the part number PP-5VX765-EPDM-AS when requesting a quote; the team can confirm it against your drive details.
Dimensions
- Section
- 5VX
- Length
- 1943mm
Frequently asked questions
- How do I confirm the Movendis PP-5VX765-EPDM-AS is the right replacement?
- Compare the profile and length marked on your existing belt. This belt is a 5VX profile, 1943 mm long. If those match, it is the correct size. You can also send the part number and a photo of the old belt marking for confirmation.
- What should I check on the drive before installing a new belt?
- Inspect the sheave grooves for wear, rust, or debris. Verify that the sheaves are aligned and that the belt tension is set to the drive manufacturer's specification. Replace any worn sheaves before installing the new belt.
- Can I request a quote for this belt by part number?
- Yes. Send the part number PP-5VX765-EPDM-AS via WhatsApp or email. The team will reply promptly with a quote and can help confirm the belt or suggest an equivalent if needed.