V-belt Movendis PP-5VX720-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX720-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX720-EPDM-AS and any equivalents.
The Movendis PP-5VX720-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a length of 1829 mm. It is part of the PowerPlus EPDM Cogged Raw Edge Narrow series. Before you fit it, check the drive and sheaves so the new belt runs true from the start.
Inspect sheave grooves for wear, rust, or embedded debris. Worn grooves let the belt sit too deep, which reduces grip and can cause slip or heat buildup. Check alignment with a straightedge or laser so the belt enters and exits each sheave without side loading. Confirm that the sheaves match the 5VX profile and that no groove is chipped or undersized.
Turn the drive by hand and check bearings, bushings, and shafts for play or roughness. Verify that the take-up adjustment has enough travel to tension the new belt correctly. If the drive uses multiple belts, replace the full set at the same time so lengths match and load shares evenly. The PP-5VX720-EPDM-AS has a raw edge cogged construction and a 1829 mm length; confirm both against the old belt marking before installation.
Dimensions
- Section
- 5VX
- Length
- 1829mm
Frequently asked questions
- What should I check on the sheaves before fitting this belt?
- Look for groove wear, rust, and debris. Worn grooves change the effective diameter and can cause slip. Also check alignment and that the sheaves are correct for the 5VX profile.
- Can I replace just one belt on a multi-belt drive?
- It is best practice to replace the full set at once. Belts wear and stretch together, so mixing a new belt with old ones can lead to uneven load sharing and premature failure.
- How do I confirm the PP-5VX720-EPDM-AS is the right belt?
- Check the marking on the back of the old belt for the 5VX profile and the 1829 mm length. If you are unsure, send the part number and a photo of the old belt marking to MR for confirmation.