V-belt Movendis PP-5VX555-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX555-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX555-EPDM-AS and any equivalents.
The Movendis PP-5VX555-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a length of 1410 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. To match it to the belt being replaced, compare the profile and length on the existing belt's back.
Start by reading the marking on the back of the old belt. The profile and length printed there are the two values that identify the correct replacement. This belt is a 5VX profile and measures 1410 mm, so the old belt should show the same profile and length. If the marking is worn away, measure the top width and the outside length and compare them with those figures.
Once the profile and length match, confirm the construction is suitable for the drive. This is a cogged narrow V-belt with a raw edge, which is used where a standard wrapped narrow V-belt runs. Cogged belts bend more easily around small pulleys. If the drive uses more than one belt, replace all belts in the set at the same time so the load stays even across the grooves.
If you are unsure whether the 5VX profile and 1410 mm length are right for your drive, send the part number and a photo of the old belt's marking. The team can confirm the belt or suggest an equivalent. Quotes are handled by WhatsApp or email using the part number.
Dimensions
- Section
- 5VX
- Length
- 1410mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the profile and length marked on the back of the old belt. This belt is 5VX profile and 1410 mm long. If those two values match, it is the correct size.
- What should I send to get a quote?
- Send the part number PP-5VX555-EPDM-AS by WhatsApp or email. If you want us to confirm the belt against your drive, include the profile and length from the old belt.
- Can I replace just one belt in a multi-belt drive?
- For drives that use more than one belt, replace all belts in the set at the same time. Mixing a new belt with old belts can cause uneven loading across the grooves.