V-belt Movendis PP-5VX535-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX535-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX535-EPDM-AS and any equivalents.
When a drive belt needs replacing, the marking on the back of the old belt is the most reliable starting point. This page covers the Movendis PP-5VX535-EPDM-AS, a cogged narrow V-belt in the 5VX profile with a 1359 mm length. Read the old belt first, then match the profile and length to this part number.
The Movendis PowerPlus EPDM Cogged Raw Edge Narrow series is built for drives that use narrow-section belts. The PP-5VX535-EPDM-AS is a cogged narrow V-belt with a 5VX profile and a 1359 mm length. The cogged raw edge design is intended for compact pulley diameters where a standard wrapped belt may not perform as well.
To confirm this belt fits, look at the back of the belt you are removing. You should find the profile and a length marking. If the profile reads 5VX and the length corresponds to 1359 mm, this part number is the direct match. Write down the full marking before the old belt is discarded, because worn or dirty belts can make the characters hard to read.
If the marking is missing or unreadable, measure the outside length and check the cross-section against the 5VX profile. For a quote, send the part number PP-5VX535-EPDM-AS, or send the marking from the old belt and the drive it runs on. We carry Movendis belts and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 5VX
- Length
- 1359mm
Frequently asked questions
- How do I read the marking on my old belt to match this part?
- Look for the profile and length on the back of the belt. This belt is marked with the 5VX profile and a 1359 mm length. If your old belt shows the same profile and length, the PP-5VX535-EPDM-AS is the matching part number.
- What if the marking on my old belt is worn off?
- Measure the outside length of the old belt and check the cross-section. Compare those measurements to the 5VX profile and 1359 mm length of this belt. If you are unsure, send a photo of the old belt and the drive to our team for confirmation.
- What information should I send to request a quote?
- Send the part number PP-5VX535-EPDM-AS, or the full marking from the old belt along with the drive details. Our team replies by WhatsApp or email and can help confirm the right belt or suggest an equivalent.