V-belt Movendis PP-5VX445-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX445-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX445-EPDM-AS and any equivalents.
The Movendis PP-5VX445-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a length of 1130 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. To match it to the belt being replaced, read the marking on the back of the old belt and compare the profile and length before ordering.
When a drive is down, the fastest way to confirm the right replacement is to check the old belt itself. The back of the belt carries the profile and the length, and those two values are what identify the part. This belt is a 5VX profile with a length of 1130 mm. If the marking on your old belt reads 5VX and 1130 mm, this is the same size.
Cogged narrow V-belts are used where a standard wrapped belt would run too hot or slip under load. The raw edge and cog design help the belt bend around smaller pulleys without losing grip. Inspect the pulleys and sheaves for wear, oil or debris at the same time. A worn groove can shorten the life of a new belt, so check the drive before installing a replacement.
If the marking on the old belt is worn or unreadable, measure the outside length and confirm the profile with a belt gauge. You can also send a photo of the old belt and the drive to our team. We carry the Movendis PP-5VX445-EPDM-AS and can help confirm it is the correct belt for your application. Request a quote by part number through WhatsApp or email.
Dimensions
- Section
- 5VX
- Length
- 1130mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt. The profile should read 5VX and the length should be 1130 mm. If both match, this is the same size. If the marking is unreadable, measure the outside length and check the profile with a belt gauge.
- What should I send to request a quote?
- Send the part number PP-5VX445-EPDM-AS, the quantity you need, and a photo of the old belt or the drive if you have one. Our team will confirm the belt and reply by WhatsApp or email.
- Can you help if the old belt marking is worn off?
- Yes. Send a photo of the old belt and the pulleys, along with any measurements you can take. We will help identify the correct profile and length.