V-belt Movendis PP-5VX345-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX345-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX345-EPDM-AS and any equivalents.
The Movendis PP-5VX345-EPDM-AS is a cogged narrow V-belt in the 5VX profile with an 876 mm length. Cogged narrow V-belts are used on high-speed industrial drives where a compact cross-section and good grip on small pulleys are required. Confirm fit by matching the profile and length to the drive's pulley grooves and the belt you are replacing.
This belt is built for drives such as pumps, fans, compressors and other rotating equipment where a narrow V-belt is specified. The raw-edge cogged construction helps the belt run cool and flex over small pulleys. It is not a serpentine or timing belt, so check that the drive uses a single V-groove pulley set.
To confirm fit, read the marking on the back of the old belt. The 5VX profile and the 876 mm length must match the drive's pulley grooves and center distance. If the old belt is worn or the marking is unreadable, measure the outside length and check the pulley groove width against the 5VX section.
For a quote, send the part number PP-5VX345-EPDM-AS, the quantity needed and the drive it fits. If you are replacing more than one belt on a multi-belt drive, include the full set so we can match the length.
Dimensions
- Section
- 5VX
- Length
- 876mm
Frequently asked questions
- How do I confirm the Movendis PP-5VX345-EPDM-AS will fit my drive?
- Check the old belt marking for the 5VX profile and 876 mm length, and confirm the drive pulleys have a matching 5VX groove. If the marking is gone, measure the outside length and pulley groove width.
- What should I send to request a quote for this belt?
- Send the part number PP-5VX345-EPDM-AS, the quantity you need and the equipment it fits. If you are replacing a set, include the number of belts on the drive.
- Is this a cogged narrow V-belt?
- Yes. The Movendis PP-5VX345-EPDM-AS is a cogged narrow V-belt in the 5VX profile with an 876 mm length, designed for industrial drives that call for a narrow V-belt.