V-belt Movendis PP-5VX1905-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX1905-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1905-EPDM-AS and any equivalents.
The Movendis PP-5VX1905-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a length of 4839 mm. It is built for drives that use a 5VX cross section and a matching outside length. To select it correctly, compare the marking on the belt you are replacing with this part number and confirm the profile and length agree.
Start by reading the back of the old belt. You are looking for the profile, 5VX, and the length, 4839 mm. If the old belt is worn, cut, or the marking is gone, measure the outside length and check the cross section against the 5VX profile. The new belt must match both values.
A cogged narrow V-belt like this one is used where a standard wrapped belt would run hotter or slip. The raw edge and cogged construction are part of the PowerPlus EPDM Cogged Raw Edge Narrow series. When you replace it, inspect the sheaves for wear, alignment, and debris before installing the new belt.
If you are unsure whether this is the correct belt, send the part number from the old belt, the profile and length you measured, and a photo of the drive to our team. We carry the Movendis PP-5VX1905-EPDM-AS and can help confirm it or suggest an equivalent.
Dimensions
- Section
- 5VX
- Length
- 4839mm
Frequently asked questions
- How do I confirm the Movendis PP-5VX1905-EPDM-AS is the right belt for my drive?
- Check the marking on the belt being replaced. The profile should read 5VX and the length should be 4839 mm. If the old belt is unreadable, measure the outside length and compare the cross section to the 5VX profile.
- What information should I send to request a quote?
- Send the part number PP-5VX1905-EPDM-AS, or the marking from your old belt, along with the profile and length you measured. A photo of the drive and sheave details can help us confirm the match.
- Can you help if I cannot find the marking on the old belt?
- Yes. Provide the measured outside length and the cross section, and our team will compare it to the 5VX profile and 4839 mm length of this belt. We can also help identify an equivalent if the exact belt is not the right fit.