V-belt Movendis PP-5VX1745-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX1745-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1745-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt is a cogged narrow V-belt in the 5VX profile with a length of 4432 mm. It is built for industrial drives that run narrow-section belts, including pumps, fans, compressors and other process equipment where a raw-edge cogged construction is used.
To confirm fit, check the drive for the belt section and the length marked on the old belt. The 5VX profile and 4432 mm length identify this belt; if the old belt is worn or unreadable, measure the outside length and note the cross-section before ordering.
Cogged narrow V-belts are common on drives where space is limited and speeds are moderate to high. Because this is a raw-edge EPDM belt, it is suited to environments where oil, heat and ozone are present, though the drive conditions should always be reviewed against the belt's construction.
When replacing, inspect the sheaves for wear, alignment and debris, and replace belts in sets if the drive uses multiple belts. Send the part number PP-5VX1745-EPDM-AS by WhatsApp or email to request a quote or to confirm this is the correct belt for your drive.
Dimensions
- Section
- 5VX
- Length
- 4432mm
Frequently asked questions
- What does the 5VX profile mean for my drive?
- The 5VX profile is a narrow V-belt cross-section. It fits sheaves machined for 5VX belts and should not be mixed with other sections without checking the sheave groove.
- How do I confirm the length before ordering?
- Compare the 4432 mm length with the marking on your existing belt or measure the belt's outside length. If the marking is worn, send a photo of the drive and the sheave dimensions for help.
- Can I replace just one belt in a multi-belt drive?
- On drives that use more than one belt, best practice is to replace the full set so all belts carry equal load. Check the sheaves for wear at the same time.