Skip to main content
All products
Movendis logo · MOVENDIS PP-5VX1690-EPDM-AS
V-belt Movendis PP-5VX1690-EPDM-AS

MOVENDISBrand We Carry

V-belt Movendis PP-5VX1690-EPDM-AS

Manufacturer part numberPP-5VX1690-EPDM-ASAlso known as: PP5VX1690EPDMAS · PP 5VX1690 EPDM AS
Subcategory
V-belts
Section
5VX
Series
PowerPlus EPDM Cogged Raw Edge Narrow
Get a quote for PP-5VX1690-EPDM-AS on WhatsApp

We reply promptly.

Tell us the quantity you need and request a quote by WhatsApp or email.

Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.

Ask on WhatsAppAsk by email

Description

MOVENDIS PP-5VX1690-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1690-EPDM-AS and any equivalents.

This Movendis belt is a cogged narrow V-belt in the 5VX profile with a length of 4293 mm. The profile and length are the two figures to match against your drive before you order.

The 5VX profile identifies a narrow V-belt cross-section, and the 4293 mm length is the datum to compare with the belt you are replacing. The cogged raw edge construction is part of the PowerPlus EPDM Cogged Raw Edge Narrow series. Read the marking on the back of the old belt and match both the profile and the length exactly.

If the marking is worn or missing, measure the old belt and note the profile and length, then send those figures with the part number PP-5VX1690-EPDM-AS. Our team can confirm the belt or suggest an equivalent from what we carry.

For drives that run more than one belt, replace the full set at the same time so the belts share the load evenly. Inspect the sheaves for wear or damage while the drive is open, and check that the new belt sits correctly in the grooves before restarting.

Dimensions

Section
5VX
Length
4293mm

Frequently asked questions

What do the profile and length tell me about this belt?
The 5VX profile is a narrow V-belt cross-section, and 4293 mm is the length. Both must match the drive and the belt being replaced.
How do I confirm this is the right belt for my drive?
Read the marking on the back of the old belt, or measure it, and compare the profile and length with 5VX and 4293 mm. Send the part number PP-5VX1690-EPDM-AS with those details for confirmation.
Should I replace all the belts on a multi-belt drive?
Yes. Replace the full set at the same time so the belts share the load evenly and wear at the same rate.
Get a quote for PP-5VX1690-EPDM-AS on WhatsApp
Quote on WhatsApp