V-belt Movendis PP-5VX1650-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX1650-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1650-EPDM-AS and any equivalents.
The Movendis PP-5VX1650-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a length of 4191 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. This page is for maintenance and purchasing staff who need to match the belt currently on the drive.
Start by reading the marking on the back of the belt you are replacing. The profile and the length are the two values that must line up: this belt is 5VX and 4191 mm. If the old marking is worn or missing, measure the outside length and check the cross-section against a 5VX profile before ordering.
A cogged narrow V-belt of this type is used where a standard wrapped belt may not suit the pulley size or the drive layout. Confirm the belt sits correctly in the pulley grooves and that the sheave condition is acceptable before fitting a replacement. If the drive runs more than one belt, replace the full set so the load stays even across the grooves.
For a quote, send the part number PP-5VX1650-EPDM-AS, or the profile and length from the old belt. If the exact marking is unclear, send a photo of the belt and the pulley arrangement. We carry Movendis belts and can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 5VX
- Length
- 4191mm
Frequently asked questions
- How do I confirm this is the correct replacement belt?
- Check the marking on the old belt. The profile must be 5VX and the length must be 4191 mm. If the marking is unreadable, measure the outside length and compare the cross-section to a 5VX profile.
- What should I send to request a quote?
- Send the part number PP-5VX1650-EPDM-AS, or the profile and length from the belt being replaced. A photo of the old belt and the drive helps if the marking is unclear.
- Should I replace more than one belt at a time?
- On a multi-belt drive, replace the full set so the load is shared evenly across the grooves. Check the pulleys for wear before fitting the new belts.