V-belt Movendis PP-5VX1620-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX1620-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1620-EPDM-AS and any equivalents.
The Movendis PP-5VX1620-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a length of 4115 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. This page helps you match it to the belt you are replacing.
To confirm the replacement, read the marking on the back of the old belt. The profile should be 5VX and the length should be 4115 mm. If the old belt is worn or the marking is gone, measure the length and check the cross-section against the 5VX profile.
The cogged raw edge construction is suited to drives where a standard wrapped belt may not provide enough flexibility. The EPDM compound is part of the PowerPlus series. When ordering, send the part number PP-5VX1620-EPDM-AS to confirm the exact belt.
If you are replacing more than one belt on the same drive, order the same part number for all positions. Mixing a new belt with used belts can cause uneven tension. For a quote, send the part number and the quantity you need by WhatsApp or email.
Dimensions
- Section
- 5VX
- Length
- 4115mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the old belt: it should show 5VX and a length of 4115 mm. If the marking is not readable, measure the outside length and compare the cross-section to the 5VX profile.
- Can I use this belt on a drive that currently uses a different profile?
- No. The PP-5VX1620-EPDM-AS is a 5VX profile belt with a length of 4115 mm. The drive pulleys must be designed for the 5VX profile and this length.
- What information do I need to send for a quote?
- Send the part number PP-5VX1620-EPDM-AS and the quantity you need. If you are not sure about the profile or length, include the marking from the old belt or your measurements.