V-belt Movendis PP-5VX1435-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX1435-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1435-EPDM-AS and any equivalents.
The Movendis PP-5VX1435-EPDM-AS is a cogged narrow V-belt in the 5VX profile, 3645 mm long, from the PowerPlus EPDM Cogged Raw Edge Narrow series. Before you fit it, spend a few minutes on the drive itself. A new belt on worn sheaves will not run the way it should.
Check the sheave grooves for wear, rust, and buildup. A groove that has worn wide lets the belt sit too deep, so it slips and runs hot. Look at the sheave alignment as well: straight edges across the two sheaves show whether the belt will track true or run against a flange.
Inspect the rest of the drive while it is open. Turn the sheaves by hand and feel for bearing roughness or play. Confirm the take-up has enough travel left to tension the new belt, and check that guards and mounting bolts are sound. Fixing these points first keeps the replacement belt running correctly.
The belt is marked PP-5VX1435-EPDM-AS, with the 5VX profile and 3645 mm length. Send that marking, or the part number, by WhatsApp or email and we will confirm it against your drive and quote the belt.
Dimensions
- Section
- 5VX
- Length
- 3645mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and send it to us. The profile and length on this belt are 5VX and 3645 mm, so we can check your number against those figures before quoting.
- What should I check on the sheaves before fitting a new belt?
- Look for worn or widened grooves, rust, and buildup, and check that the sheaves are aligned. Also turn them by hand to feel for bearing roughness, and confirm the take-up still has travel for tensioning.
- What do you need to quote this belt?
- Send the part number PP-5VX1435-EPDM-AS, or the marking from the old belt, by WhatsApp or email along with the quantity you need. We will reply with a quote.