V-belt Movendis PP-5VX1315-EPDM-AS

MOVENDIS PP-5VX1315-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1315-EPDM-AS and any equivalents.

The Movendis PP-5VX1315-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a 3340 mm length. It is part of the PowerPlus EPDM Cogged Raw Edge Narrow series and is used in industrial drives where a narrow cross-section and a long center distance are required. Confirm fit by matching the profile and length to your existing belt.

Cogged narrow V-belts are common on fans, pumps, compressors and other driven equipment where space is limited and speeds are moderate to high. The raw edge and cogged construction are typical of this series, and the 5VX profile is a narrow wedge cross-section. Because this belt is 3340 mm long, it is likely to be found on drives with larger pulley spacing or multiple pulleys.

To confirm this belt fits your drive, read the marking on the back of the old belt and compare the profile and length. The profile should be 5VX and the length should be 3340 mm. Also check the pulley grooves for wear and ensure the belt is not twisted or forced into the grooves. If the old belt is worn or stretched, replace it with the same profile and length.

When requesting a quote, send the part number PP-5VX1315-EPDM-AS, the profile and the length, and the quantity you need. If you are replacing a belt on a drive with multiple belts, it is good practice to replace all belts in the set at the same time so they wear evenly. Our team can confirm the right belt or suggest an equivalent based on the information you provide.