V-belt Movendis PP-5VX1270-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX1270-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1270-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt is a cogged narrow V-belt in the 5VX profile with a length of 3226 mm. The profile and length are the two numbers to match when replacing an existing belt.
The 5VX profile is a narrow V-belt cross-section, and the cogged raw edge construction is the type used on compact, high-speed drives. The 3226 mm length is the datum to check against the old belt or the drive specification. If your current belt carries these two values, this Movendis part is the direct size match.
To confirm, read the marking on the back of the old belt and compare both the profile and the length. If the marking is worn or the belt is missing, measure the outside length and check the drive sheave groove to identify the profile. Send the part number PP-5VX1270-EPDM-AS or your measured profile and length, and we will confirm the match or suggest an equivalent.
When replacing a set of belts on a multi-groove drive, fit all belts at the same time from the same production batch so they share the load evenly. Inspect the sheaves for wear, alignment and debris before installation, and check the tension after the first run-in period.
Dimensions
- Section
- 5VX
- Length
- 3226mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The 5VX profile defines the cross-section that fits the sheave groove, and 3226 mm is the length. Both values must match the belt being replaced.
- How do I confirm this belt fits my drive?
- Read the marking on the back of the old belt. If it shows 5VX and 3226 mm, this Movendis belt is the same size. If the marking is unreadable, measure the old belt and the sheave groove, then send those details for confirmation.
- What should I send to request a quote?
- Send the part number PP-5VX1270-EPDM-AS, or the profile and length from your old belt, by WhatsApp or email. We will confirm the belt or suggest an equivalent.