V-belt Movendis PP-5VX1190-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX1190-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1190-EPDM-AS and any equivalents.
The Movendis PP-5VX1190-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a length of 3023 mm. If you are replacing a belt on a drive, the first step is to confirm the profile and length match the belt that came off. This page covers how to verify those two values and what to send for a quote.
The marking on the back of an old belt is the fastest way to identify what you need. Read the profile and length from the belt before it is discarded, and compare them to the 5VX profile and 3023 mm length of the PP-5VX1190-EPDM-AS. If the marking is worn or missing, measure the old belt and note the cross-section and outside length.
When a drive uses more than one belt, inspect every belt in the set. A new belt matched to the profile and length of the one being replaced keeps the set consistent. Send the part number, the belt marking, or the profile and length you measured, and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 5VX
- Length
- 3023mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Check the marking on the back of the old belt for the profile and length. The PP-5VX1190-EPDM-AS is a 5VX profile belt with a length of 3023 mm. If the marking is not readable, measure the old belt and send the profile and length.
- What should I send to request a quote?
- Send the part number PP-5VX1190-EPDM-AS, or the marking from the belt being replaced, or the profile and length you measured. The team replies by WhatsApp or email and can help confirm the right belt or suggest an equivalent.
- Should I replace all belts on a multi-belt drive at once?
- Inspect every belt in the set. Matching each replacement to the same profile and length keeps the set consistent. If you are unsure of the profile or length, send the old belt details for confirmation.