V-belt Movendis PP-5VX1110-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX1110-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1110-EPDM-AS and any equivalents.
The Movendis PP-5VX1110-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a length of 2819 mm. Cogged narrow V-belts are commonly used on industrial drives where a compact cross-section and flexibility around small pulleys are needed. Confirm fit by matching the profile and length to the drive and the marking on the old belt.
On a typical drive, a 5VX belt runs in 5V sheaves and is often specified where space is limited or where the belt must bend around smaller pulleys. The cogged raw edge construction can help with heat dissipation and grip on the pulley, but the first check is always the belt marking. Look for 5VX and the length on the back of the old belt, then compare it to the 2819 mm length of this Movendis belt.
If the marking is worn or missing, measure the outside length of the old belt and check the sheave groove width to confirm the 5VX profile. Inspect the sheaves for wear, alignment and debris before installing a new belt. When a drive uses multiple belts, replace the full set at the same time so the load stays evenly distributed.
For a quote, send the part number PP-5VX1110-EPDM-AS, the quantity, and the drive details if you have them. If you are unsure about the profile or length, send a photo of the old belt marking and the sheave dimensions. The team can confirm the belt or suggest an equivalent.
Dimensions
- Section
- 5VX
- Length
- 2819mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the back of the old belt for 5VX and the length. This belt is 5VX profile and 2819 mm long. If the marking is not readable, measure the outside length and check the sheave groove width.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses a set of belts, replace all belts in the set at the same time. Mixing a new belt with used belts can cause uneven loading and premature failure.
- What information do I need to request a quote?
- Send the part number PP-5VX1110-EPDM-AS, the quantity you need, and any drive details or a photo of the old belt marking. If you are unsure of the profile or length, include the sheave dimensions.