V-belt Movendis PP-5VX1090-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX1090-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1090-EPDM-AS and any equivalents.
The Movendis PP-5VX1090-EPDM-AS is a cogged narrow V-belt in the 5VX profile, with a length of 2769 mm. For a maintenance, engineering or purchasing professional, those two figures are the starting point: the profile fixes the groove width the belt must sit in, and the length fixes the center distance it must span.
This belt belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. The 5VX profile is a narrow V-belt profile, and the cogged raw edge construction is the form used where the belt runs over smaller pulleys and needs to flex. The length is given as 2769 mm.
When you are matching a belt on a drive, read the marking on the back of the old belt first. If it shows a 5VX profile and a length that corresponds to 2769 mm, the PP-5VX1090-EPDM-AS is the direct match to request. If the marking is worn or unreadable, measure the outside length and note the profile from the pulley groove, then send both figures.
If you are replacing more than one belt on a multi-belt drive, order the full set under the same part number so all belts on the drive share the same profile and length.
Dimensions
- Section
- 5VX
- Length
- 2769mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The 5VX profile tells you which pulley groove the belt is made to fit, and the 2769 mm length tells you the belt length. Both must match the drive before you order.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. If it reads 5VX and the length matches 2769 mm, this is the belt to quote. If the marking is gone, measure the belt length and identify the profile from the pulley.
- What should I send to get a quote?
- Send the part number PP-5VX1090-EPDM-AS, or the profile and length from your old belt, by WhatsApp or email. If you are unsure of the profile, include a photo of the belt marking and the pulley groove.