V-belt Movendis PP-5VX1065-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5VX1065-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5VX1065-EPDM-AS and any equivalents.
The Movendis PP-5VX1065-EPDM-AS is a cogged narrow V-belt in the 5VX profile with a length of 2705 mm. It is part of the PowerPlus EPDM Cogged Raw Edge Narrow series. To match it to the belt being replaced, read the markings on the old belt and compare profile and length.
Start by checking the profile. The old belt should show 5VX on its back, which corresponds to this belt. Next, confirm the length: this belt is 2705 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 2705 mm. A belt that is too short or too long will not tension correctly and can damage the drive.
The PP-5VX1065-EPDM-AS is a cogged narrow V-belt, also called a wedge belt. The raw edge and cogged construction are part of the PowerPlus EPDM series. When replacing, inspect the sheaves for wear, alignment and debris. If multiple belts run on the same drive, replace them as a set to keep load sharing even.
For a quote, send the part number PP-5VX1065-EPDM-AS or the profile and length from the old belt. If the exact number is not on the belt, a photo of the marking and a measurement of the outside length help confirm the right match. We carry Movendis belts and can help you identify the correct replacement.
Dimensions
- Section
- 5VX
- Length
- 2705mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Check the old belt for the profile marking 5VX and confirm the length is 2705 mm. If the marking is worn, measure the outside length and compare it to 2705 mm.
- What does the part number PP-5VX1065-EPDM-AS indicate?
- The part number identifies a Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt in the 5VX profile with a length of 2705 mm. Use the profile and length to verify it matches your drive.
- What should I send to request a quote?
- Send the part number PP-5VX1065-EPDM-AS, or the profile and length from the belt you are replacing. If you have a photo of the old belt marking or a measurement, include that to help confirm the match.