V-belt Movendis PP-5V960
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5V960 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5V960 and any equivalents.
The Movendis PP-5V960 is a narrow wedge V-belt in the PowerPlus series, built to the 5V profile with a 2452 mm length. If you are replacing a belt on an existing drive, this page covers how to confirm the PP-5V960 is the one you need.
Start with the belt you are removing. Read the marking printed on the back of the old belt and compare it against the part number, profile and length shown here. A 5V profile belt and a 2452 mm length are the two figures that decide fit on a narrow wedge drive, so both need to line up before you order.
Where the old marking is worn or unreadable, measure the belt and check the drive sheave groove profile against the 5V designation. Confirm the number of belts on the drive as well; matched sets are common on multi-belt drives, and replacing every belt on the drive at the same time keeps the load shared evenly across the grooves.
Once you have the part number, send it to us by WhatsApp or email and we will confirm the PP-5V960 or point you to the closest match in the PowerPlus line. Include the belt marking, the profile and the length from your measurement so we can check it against the 5V and 2452 mm figures.
Dimensions
- Section
- 5V
- Length
- 2452mm
Frequently asked questions
- How do I confirm the PP-5V960 matches the belt I am replacing?
- Compare the marking on the back of the old belt with the part number, the 5V profile and the 2452 mm length. If the marking is gone, measure the belt and check the sheave groove profile before ordering.
- What should I send with my quote request?
- Send the part number PP-5V960, or the marking from the old belt, along with the profile and length you measured. A photo of the belt back and the drive is helpful when the marking is worn.
- Should I replace all the belts on the drive at once?
- On drives running more than one belt, replacing the full set together keeps tension and load even across the grooves. Check how many belts the drive carries before you order.