V-belt Movendis PP-5V580
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5V580 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5V580 and any equivalents.
The Movendis PP-5V580 is a narrow wedge V-belt in the 5V profile with a length of 1482 mm. It is built for industrial drives where a compact, high-capacity belt is needed. To confirm fit, match the 5V profile and the 1482 mm length to your existing belt or drive specification.
Narrow wedge V-belts are common on pumps, fans, compressors, and other driven equipment where space is limited and loads are steady. The 5V profile is a standard narrow cross-section, and the 1482 mm length is the datum to check against your old belt or sheave dimensions.
To confirm fit, read the marking on the back of the belt you are replacing. The profile and length should correspond to 5V and 1482 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the 1482 mm figure, and check that the sheave grooves are cut for a 5V cross-section.
When you request a quote, send the part number PP-5V580 and the quantity you need. If you are replacing belts on a multi-belt drive, note the number of belts in the set so the team can help you match the full set.
Dimensions
- Section
- 5V
- Length
- 1482mm
Frequently asked questions
- What does the 5V profile mean for this belt?
- The 5V profile is a narrow wedge cross-section. It is used in industrial drives that require a compact belt with good power transmission. The PP-5V580 is built to this profile and has a length of 1482 mm.
- How do I confirm the PP-5V580 will fit my drive?
- Check the marking on your existing belt. It should show a 5V profile and a length of 1482 mm. Also confirm that the sheave grooves are designed for a 5V belt. If you are unsure, send the part number and a photo of the old belt marking when you request a quote.
- Can I order a single belt or do I need to order a set?
- The PP-5V580 can be quoted as a single belt. On drives that use multiple belts, it is common practice to replace all belts in the set at the same time. Let the team know how many belts your drive uses when you request a quote.