V-belt Movendis PP-5V1600
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-5V1600 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5V1600 and any equivalents.
The Movendis PP-5V1600 is a PowerPlus narrow wedge V-belt with a 5V profile and a 4064 mm length. Narrow wedge belts like this one are used in industrial drives where a compact cross-section carries the load, such as pumps, fans, compressors and process machinery. Confirm fit by matching the profile and length on the belt you are replacing.
The 5V profile is a narrow wedge cross-section, and the 4064 mm length is the datum length for this belt. On the drive, check that the sheave groove is cut for a 5V belt and that the belt sits correctly in the groove without riding on the bottom. Measure the old belt with it laid flat and compare the marking on the back to the PP-5V1600.
Inspect the sheaves for wear, rust or a polished groove bottom, and check alignment and tension before installing a new belt. On multi-belt drives, replace all belts in the set at the same time so the load is shared evenly. If the belt shows cracking, glazing or missing cord, the drive should be checked before the replacement is fitted.
Dimensions
- Section
- 5V
- Length
- 4064mm
Frequently asked questions
- How do I confirm the PP-5V1600 fits my drive?
- Check the old belt marking for a 5V profile and a 4064 mm length. Also confirm the sheave groove is a 5V section and that the belt does not bottom out in the groove.
- What should I send to request a quote?
- Send the part number PP-5V1600, the profile and length from the old belt, and the quantity you need. If the old belt marking is worn, send a photo of the back of the belt and the sheave.
- Should I replace all belts on the drive at once?
- On a multi-belt drive, replace the full set together. Mixing a new belt with used belts can cause uneven tension and early failure.