V-belt Movendis PP-5V1250

MOVENDIS PP-5V1250 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-5V1250 and any equivalents.

The Movendis PP-5V1250 is a narrow wedge V-belt from the PowerPlus series, built for industrial drives that need a compact, high-capacity belt. It uses the 5V profile and measures 3192 mm in length. This page covers where this type of belt is used and how to confirm it fits your drive before you request a quote.

Narrow wedge V-belts like the 5V profile are common on pumps, fans, compressors, mixers and other driven equipment where the sheave grooves are cut for wedge belts rather than classical V-belts. The 5V section sits deeper in the groove and transmits more load per belt than a comparable classical section, which is why it shows up on heavier industrial drives. The PP-5V1250 is the specific belt to order when your drive is set up for a 5V belt and the required length is 3192 mm.

To confirm fit, read the marking on the back of the old belt and match both the profile and the length. If the old belt is stamped 5V and 3192 mm, the PP-5V1250 is the direct replacement. Check the sheave grooves for wear and make sure the belt sits at the correct height in the groove. On multi-belt drives, replace all belts in the set at the same time so the load stays evenly divided.

If the marking is worn off, measure the outside length of the old belt and note the cross-section, then send both to our team along with the drive details. We can confirm the Movendis PP-5V1250 or point you to an equivalent. Send your part number by WhatsApp or email and we will reply promptly.