Timing belt Movendis PP-525-5M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-525-5M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-525-5M-480 and any equivalents.
The Movendis PP-525-5M-480 is a PowerPlus curvilinear timing belt with an HTD 5M profile, a 525 mm length and a 5 mm pitch. To match it to the belt you are replacing, compare the markings on the old belt with these three values before you order.
Start with the profile. The HTD 5M tooth form and the 5 mm pitch must match the pulleys on the drive. A belt with the same length but a different profile will not seat correctly in the grooves.
Next, confirm the length. This belt is listed at 525 mm. If the old belt is worn or its marking is unreadable, measure the drive or count teeth and compare against the original specification.
Once profile and length agree, the PP-525-5M-480 is the correct replacement. Send us the part number and the marking from your old belt, and we will confirm it or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 525mm
Frequently asked questions
- How do I match the PP-525-5M-480 to the belt I am replacing?
- Check the marking on the back of the old belt. The profile must be HTD 5M, the pitch 5 mm and the length 525 mm. If all three match, this is the belt for your drive.
- What should I send to request a quote?
- Send the part number PP-525-5M-480, or the marking from the old belt, by WhatsApp or email. We will confirm the profile, pitch and length against your drive.
- What if the marking on my old belt is worn off?
- Measure the pulley grooves and the drive length, or count the teeth on the old belt. With those details we can help you confirm the HTD 5M profile and the 525 mm length.