Timing belt Movendis PP-4698-D/3M-180

MOVENDIS PP-4698-D/3M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-4698-D/3M-180 and any equivalents.

The Movendis PP-4698-D/3M-180 is a double-sided timing belt from the PowerPlus Double-Sided Timing Belts series. It measures 4698 mm in length. This type of belt is used in drives that need power takeoff from both faces of the belt, where a standard single-sided timing belt cannot transmit motion on both sides.

Double-sided timing belts are common on industrial drives with reversing or dual-direction loads, and on equipment where two shafts must be driven from opposite sides of the same belt run. The PP-4698-D/3M-180 suits those layouts because it carries teeth on both faces, so it can engage pulleys on either side without an additional idler or a second belt.

To confirm fit, check the belt marking on the back of the old belt and match the part number and the 4698 mm length. Verify that the drive is designed for a double-sided profile and that the pulley grooves on both sides match the belt teeth. If the marking is worn or unreadable, measure the outside length and count the teeth on both faces before ordering.

Send the part number PP-4698-D/3M-180, the belt length, and a photo of the old belt marking to our team. We can confirm the belt or suggest an equivalent from the brands we carry.