Timing belt Movendis PP-440-S5M-450

MOVENDIS PP-440-S5M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-440-S5M-450 and any equivalents.

The Movendis PP-440-S5M-450 is a timing belt from the PowerPlus Curvilinear series. It uses the STD profile and measures 440 mm in length. This page gives you the profile and length data you need to confirm the belt against your drive.

For a timing belt, the profile and the length are the two figures that decide whether the belt sits correctly on the pulleys. The STD profile defines the tooth form, and the 440 mm length sets the center distance the belt will span. The PP-440-S5M-450 carries both in its marking, so you can check it directly against the belt you are replacing.

Start by reading the back of the old belt. If it shows the same part number, this is the belt to quote. If the marking is worn or unreadable, measure the length and confirm the profile from the pulley teeth. Send us the part number, or the profile and length you measured, by WhatsApp or email and we will confirm the right belt or suggest an equivalent.

When a timing belt is replaced, inspect the pulleys and the tensioner at the same time. Worn teeth or a weak tensioner will shorten the life of a new belt. If the drive runs more than one belt, replace them as a set so the load stays even.