V-belt Movendis PP-3VX985-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-3VX985-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-3VX985-EPDM-AS and any equivalents.
The Movendis PP-3VX985-EPDM-AS is a cogged narrow V-belt in the 3VX profile, with a length of 2502 mm. It is built for drives that use a 3VX cross-section and a 2502 mm datum length. To match it to the belt being replaced, confirm both the profile and the length.
Start with the belt you are replacing. Read the marking on the back: it should show the 3VX profile and a length that corresponds to 2502 mm. If the old belt is worn, stretched or unreadable, measure the outside circumference and compare it against the 2502 mm figure. A belt with the same profile but a different length will not sit correctly in the sheave grooves.
The PP-3VX985-EPDM-AS is a cogged narrow V-belt, so the raw edge and cogs are part of its construction. When inspecting the drive, check the sheave grooves for wear and the pulleys for alignment. On a multi-belt drive, replace all belts in the set at the same time so the load is shared evenly.
If you are unsure whether this is the correct replacement, send the part number PP-3VX985-EPDM-AS, the old belt marking and the drive details. The team can confirm the 3VX profile and 2502 mm length, or suggest an equivalent.
Dimensions
- Section
- 3VX
- Length
- 2502mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the old belt for the 3VX profile and a length corresponding to 2502 mm. If the marking is gone, measure the belt and compare it with the 2502 mm length. Matching both the profile and the length is what ensures a correct fit.
- What should I send to request a quote?
- Send the part number PP-3VX985-EPDM-AS, the old belt marking if readable, and the drive or equipment details. That lets the team confirm the 3VX profile and 2502 mm length before quoting.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses more than one belt, replace the full set at the same time. Mixing a new belt with worn belts can cause uneven loading. The PP-3VX985-EPDM-AS is a cogged narrow V-belt in the 3VX profile with a 2502 mm length.