V-belt Movendis PP-3VX940-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-3VX940-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-3VX940-EPDM-AS and any equivalents.
The Movendis PP-3VX940-EPDM-AS is a cogged narrow V-belt in the 3VX profile with a length of 2388 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. This page explains how to match it to the belt you are replacing.
To confirm this belt fits your drive, read the marking on the back of the old belt. Look for the profile and the length. The 3VX profile is a narrow cross-section, and the length is given as 2388 mm. If both match, the PP-3VX940-EPDM-AS is the correct replacement. The cogged raw edge construction is typical of this series and helps the belt run cooler and resist slipping on small pulleys.
If the old marking is worn or missing, measure the outside length of the belt and compare it to 2388 mm. Also check the pulley groove width to confirm the 3VX profile. A belt with the wrong profile or length will not seat correctly and will wear quickly. When you request a quote, send the part number and a photo of the old belt marking if possible.
Dimensions
- Section
- 3VX
- Length
- 2388mm
Frequently asked questions
- How do I match the Movendis PP-3VX940-EPDM-AS to my old belt?
- Check the profile and length on the old belt. The PP-3VX940-EPDM-AS is a 3VX profile belt with a length of 2388 mm. If your old belt shows the same profile and length, it is the correct replacement.
- What should I send to get a quote for this belt?
- Send the part number PP-3VX940-EPDM-AS and the quantity you need. If you are unsure, include a photo of the old belt marking and the pulley groove width so we can help confirm the right belt.
- Can I replace just one belt in a multi-belt drive?
- For drives with multiple belts, it is common practice to replace all belts in the set at the same time. This helps maintain even tension and load sharing. The PP-3VX940-EPDM-AS can be ordered in the quantity you need.